Your Position: Home - Hardware - What Is The Difference Between Globe Valve And Gate Valve?
It is important to understand the difference between the gate valve and the globe valve when you need to choose valves. They are both popular valve types and even look similar, but they are used in completely different places.
The globe valve can be used to start, stop and adjust the flow, and the name comes from the shape of the valve body. The tapered plug enters and exits in the fluid flow during operation. The flow rate depends on the distance between the plug and the valve seat. It is necessary for operators to be careful and not to turn the valve stem too far, as this will damage the valve seat.
It provides greater resistance to fluid flow and has a higher pressure drop even when the valve is fully opened. The bronze pressure regulator also has a great performance in the pressure-reducing process. Apart from that, the OEM brass ball valve also has a good flow regulation function.
The gate valve can be used to start and stop the flow, but it cannot adjust the flow level. However, they are actually used to isolate or connect liquids. Part of the flow is not ideally managed through the gate valve because it will damage the gate valve and cause vibrations.
The name comes from the operation way, a gate that slides between valve seats at right angles to the fluid flow. The shape of the gate can be wedge, knife or parallel.
Physically, the gate valve is higher than the globe valve when they are fully opened, and the gate valve is more likely to cause wear of the valve seat and valve disc than the globe valve.
A major difference between the gate valve and the globe valve is that the former can be installed in different directions, while the latter can be installed in only one direction.
The gate valve should be installed where the valve can be fully opened and closed. If it is over-tightened, there will be risks of twisting the gate valve.
Usually, the globe valve has better sealing performance and longer service life than the gate valve. And it is more expensive than a similar-sized gate valve, but the extra cost is worth it in the case when throttling is required.
We also have other Air Valve for sale, more details please contact Jhy valve
167
0
0
Comments
All Comments (0)
Popular Articles
How to Use a Caulk Gun
The caulking gun is used for caulking. Most caulking guns are housings with caulking tubes that allow the user to control the pressure through a trigger-like handle.
By Faunus
655
0
0
What Is The Difference Between Globe Valve And Gate Valve?
It is important to understand the difference between the gate valve and the globe valve when you need to choose valves. They are both popular valve types and even look similar, but they are used in completely different places.
By Marie
167
0
0
3 Tips for You to Find the Best Suitable Tires
Once you know what size tire is right for your car, you need to be able to choose between different types of tires. Tires may look similar, but they can be optimized to fit very different conditions and uses. Consider the following: What are the weather conditions? Where will I be driving? What is my driving style?
By CC
234
0
0
Epoxy Coated Bars Increase Durability of Engineering Structure
Epoxy-Coated steel reinforcing bar, also called corrosion resistant bar or epoxy coated rebar. It is one kind of reinforcing steel bars. Because epoxy coating is a barrier system intended to prevent moisture and chlorides from eroding surface of the reinforcing bar, it increases rebars corrosion performance and expands its using field, such as concrete structures, offshore structures, buildings, wharves, etc.
By Marie
270
0
0
Related Articles
Wafer type butterfly valves VS flange kind butterfly valves
The butterfly plate of the wafer type butterfly valve is set up in the diameter instructions of the pipeline. In the round channel of the butterfly valve body, the disc-shaped butterfly plate turns around the axis and the turning angle is between 0 ° and 90 °, which can play the duty of flow policy.
By CC
5
0
0
What are the three types of hose clamps?
Hose clamps are a critical component of fluid control systems, used to secure hoses and tubing onto fittings and connectors.
By Geym
8
0
0
Thread Repair Methods and Tools for Vehicle Parts
Thread Repair Methods and Tools for Vehicle Parts Threaded holes can be found in all areas of your vehicle, from the engine to the chassis.
By Geym
8
0
0
What Is The Wafer Type Butterfly Valve?
The butterfly plate of the wafer type butterfly valve is set up in the diameter instructions of the pipeline. In the round channel of the butterfly valve body, the disc-shaped butterfly plate turns around the axis and the turning angle is between 0 ° and 90 °, which can play the duty of flow policy.
By CC
13
0
0